<html>
<head>
<script>
<!--
//enter refresh time in "minutes:seconds" Minutes should range from 0 to infinity. Seconds should range from 0 to 59 
//Courtesy (javascriptkit.com)
var limit="1:0"
if (document.images){
var parselimit=limit.split(":")
parselimit=parselimit[0]*60+parselimit[1]*1
}
function beginrefresh(){
if (!document.images)
return
if (parselimit==1)
window.location.reload()
else{
parselimit-=1
curmin=Math.floor(parselimit/60)
cursec=parselimit%60
if (curmin!=0)
curtime=curmin+" minutes and "+cursec+" seconds left until page refresh!"
else
curtime=cursec+" seconds left until page refresh!"
window.status=curtime
setTimeout("beginrefresh()",1000)
}
}
//-->
//In FireFox to display above countdown goto Tools->Options->Web Features->Enable JavaScript / Advanced->Allow scripts to change status bar text.
//or Tools->Options->Content->Enable JavaScript / Advanced->Allow scripts to: Change status bar text.
//In MSIE7 to display above countdown first enable the Status Bar - Right-click COMMAND BAR (below address bar) and select STATUS BAR.
//Open TOOLS, INTERNET OPTIONS, select the SECURITY TAB and then INTERNET ZONE. Click CUSTOM LEVEL button.
//From the item listing, scroll down near the end of the list and find Scripting and enable "Allow status bar updates via script".
</script> 

<script type="text/javascript">
var sec = 0;
var min = 0;
function stopwatch() {
sec++;
if (sec == 60) {
sec = 0;
min += 1;
}
totalTime = ((min<=9) ? "0" + min : min) + " : " + ((sec<=9) ? "0" + sec : sec);
document.getElementById("timer").innerHTML = totalTime;
start = setTimeout("stopwatch()", 1000);
}
</script>

</head>
  <body onload="stopwatch();beginrefresh()">
    <h1>ThermoHID Template</h1>
    <p>This file can be used as a basis for a web page template.</p>
    <p>The commands in square brackets [] in the .txt file will be replaced by actual data everytime a new measurement is made.<br>
       The resulting file will be stored at the location in "Local Destination" in the "FTP" Tab of the Settings and will be stored using the .htm extension.<br>
       If this setting is left blank then the resulting file will be called "ThermoHID.htm" and will be placed in the same directory as the application<br>
       If the "Host" box is completed then the above file (ThermoHID.htm) will be transferred.  If "Host" is left blank, the file will only be stored locally.</p>
    <h2>Example</h2>
    <p>Currently there are 1 devices connected.<br>
    <li>The temperature of "TEMPer2" is <b>21.4&deg;C</b>. This was measured at 25/08/2014 09:34:54<br>
    <li>The temperature of HID Device2 is <b>Temp2&deg;C</b>.<br>
        The first under alarm is OK and will trigger when TEMPer2 is less than 14&deg;C.<br>
        Device2 Alarm is OK and will trigger when HID Device2 is greater than 50&deg;C<br>
        Device3 AlarmState is OK<br></p>
     <p>The lowest temperature that HID Device2 has ever reached is 0 whereas in the last 2 days it has only dropped to 0</p>
     <p>The average temperature of TEMPer2 is 20.6&deg;C and has been as high as 32.3&deg;C</p>
    TEMPer2@25/08/2014 09:33:55 21.4°C<br>
TEMPer2 Outer@25/08/2014 09:33:55 14.2°C<br>
High Wycombe,UK@25/08/2014 09:34:51 25/08/2014 08:50:00 14°C 94% Mostly Cloudy<br>
TEMPer2@25/08/2014 09:34:55 21.4°C<br>
TEMPer2 Outer@25/08/2014 09:34:55 14.2°C<br>

    <p><img src="TempHIDGraph.jpg"></p>
    <p><a href=http://www.thermohid.co.uk/index.htm>ThermoHID Home Page</a></p>
  </body>
</html>